PRODUCT SPECIFICATIONS

Components

1 x 18’(46cm) long excursion 6ohm driver

Height x Width x Depth

515 x 791 x 597mm( 20.25’ x 31.13’ x 23.5’)

Weight

45kg(99 lbs) net

Connectors

2 x NL 4MP speakon 4 pole

Construction

Baltic Birch Ply finished with textured polyurethane black coating

Fittings : Handles

2 integral to cabinet

Front finish

Perforated steel grilles

Flying Points

3 steel anchor points for flying tracks on side and back

Stand fittings

Internal stand fitting on top(35mm 1 3/8’) accepts a mast supporting 1 PS15

SYSTEM SPECIFICATIONS LS1200 with PS15 TDController Mkll

Frequency Response[a]

30Hz - 120Hz ± 3dB

Usable Range@-6dB[A]

29Hz - 130Hz

Sensitivity 1W@1m[b]

102dB SPL Nominal

Nominal Peak SPL@1m[b]

133 to 135dB Peak(800 to 1200W RMS Amp)

Crossover Frequencies

80Hz Active through PS15TD

Nominal Impedance

4ohms

Recommended Amplifiers

800 to 1200Watts into 4ohms

SYSTEM OPERATION

Electronic Controller

The LS1200 Subwoofer must be used with a NEXO Controller(PS15 TDMkll analogue or NX241 digital). Use without a properly connected controller will result in poor sound quality and may damage the components.

Subbass

The LS1200 Subwoofer provides optional VLF extension for PS15 Loudspeakers. Active two-way operation with the PS15 is included in the PS15TD Mkll or NX241

Speaker Cables

The PS15 is wired 2- & 2+ on speakon connectors LS1200 on 1- & 1+. Loop through speakons are present on both products. Single identical cables can thus be used to loop through comvinations of up to 2 x PS15(passive mode) & 1 x 1200 in no particular order.

SHIPPING & ORDERING

Packaging

LS1200s are sold as single items and in multiples thereof.

Shipping Weight & Volume

1 x LS.1200 = 49kg(108 lbs) 0.320 cu m(11cu ft)