PRODUCT SPECIFICATIONS

Components

VLF : 1 x 15’(38mm) long excursion 4ohm driver

Height x Width x Depth

430 x 689 x 528mm(16.88’ x 27.13’ x 20.75’)

Weight

33kg(73 lbs)net

Connectors

2 x NL4MP speakon 4 pole

Construction

Baltic Birch Ply & textured polyurethane black coating

Fittings : Handles

2 integral to cabinet

Front finish

Perforated steel grilles

Flying Points

3 steel anchor points for flying tracks on side and back

Stand fittings

Internal Stand Fitting on Top(35mm 1 3/8’) accepts a mast supporting 1 or 2 PS10s.

SYSTEM OPERATION

Frequency Response[a]

43Hz - 110Hz ± 3dB

Usable Range@-6dB[a]

38Hz - 120Hz

Sensitivity 1W@1m[b]

101dB SPL Nominal

Nominal Peak SPL@1m[b]

131 to 134 dB Peak(300 to 800W RMS Amp)

Crossover Frequencies

120Hz Active through PS10TD

Nominal Impedance

4ohms

Recommended Amplifiers

300 to 800Watts into 4ohms

SHIPPING & ORDERING

Electronic Controller

The LS500 Subwoofer must be sued with a NEXO Controller(PS10 TD analogue NX241 digital or PS10AMP integrated power amplifier). Use without a properly connected Controller will result in poor sound quality and may damage the components.

Subbass

The LS500 Subwoofer provides optional VLF extension for PS10 Loudspeakers. Active two-way operation with the PS10 is included in the PS10TD NEX241 or PS10AMP. One LS500 matches 2 x PS10 additional LS500 may be used for enhanced effect.

Speaker Cables

The PS10 is wired 2- & 2+ on speakon connectors LS500 on 1- & 1+. Loop through speakons are present on both products. Single identical cables can thus be used to loop through combinaions of up to 2 x PS10 & 1 x LS500 in no particular order. As part of a policy of continual improvement NEXO reserves the right to change specifications without notice.

SYSTEM OPERATION

Packaging

LS500s are sold as single items and in multiples thereof.

Shipping Weight & Volume

1 x LS.500 = 28kg(62 lbs) 0.238cu m(8.41 cu ft)