PRODUCT FEATURES

Components

LF : 1 x 10’(25cm) 8ohm driver
HF : 1 x 1’ throat driver + Low Distortion Constant Directivity Asymmetrical Dispersion Horn.

Height x Width x Depth

515 x 316 x 277mm(20.25’ x 12.5’ x 10.88’)

Weight

15kg(33 lbs)

Connectors

2 x NL4MP speakon 4pole

Construction

Baltic Birch Ply & textured polyurethane black coating

Fittings : Handles

2 integral to cabinet

Front finish

Acoustic foam on perforated steel grille(77% transparent)

Flying Points &
Fixed Installation

1 steel anchor point for flying track on top(6 positions)
2 steel anchor plates for flying track on bottom(1 position)

Stand fittings

Built in stand fitting 35mm(1 3/8’)

SYSTEM SPECIFICATIONS PS10 with PS10 TDController

Frequency Response[a]

65Hz - 20kHz ± 3dB(40Hz - 20kHz ± 3dB with LS500 Subwoofer)

Usable Range@-6dB[a]

58Hz - 21kHz(38Hz - 21kHz with LS500 Subwoofer)

Sensitivity 1W@1m[b]

98dB SPL Nominal - 96dB SPL Wideband

Nominal Peak SPL@1m[b]

124 to 127dB Peak(for 200 to 500W RMS Amp)

HF Dispersion[c]

50˚ to 100˚ Hor. x 55˚ Vert. Rotatable Horn 4 positions

Directivity[c]

Q : 16Nominal DI : 12dB Nominal(f>3kHz)

Crossover Frequencies

2kHz Passive

Nominal Impedance

8ohms

Recommended Amplifiers

200 to 500 Watts into 8 ohms for 1 x PS10; 400 to 1000 Watts into 4 ohms for 2 x PS10 per channel

SYSTEM OPERATION

Electronic Controller

The PS10 Loudspeaker must be used with a NEXO Controller(PS10 TD analogue NX241 digital or PS10AMP integrated power amplifier). Use without a properly connected Controller will result in poor sound quality and may damage the components.

Dispersion Configuration

After removing the quic-release front grille the HF Horn can be rotated to one of 4 positions for dispersion configuration.

Subbass

The PS10 Loudspeaker can be used with or without the optional LS500 Subwoofer.
Active two-way operation with the LS500 is included in the PS10TD NX241 or PS10AMP
One LS500 matches 2 x PS10 additional SL500 may be used for enhanced effect.

Speaker Cables

The PS10 is wired 2- @ 2+ on speakon connectors LS500 on 1- & 1+
Loop through speakons are present on both products. Single identical cables can thus be used to loop through combinations of up to 2 x PS10 @ 1 x LS500 in no particular order.

SHIPPING & ORDERING

Packaging

PS10s are sold as single items or multiples thereof.

Shipping Weight & Volume

2 x PS.10U = 34kg(75.1 lbs)0.169cu m(5.96cu ft)

Accessories

A full selection of mounting Accessories is available.