PRODUCT FEATURES

Components

LF : 1 x 8’(20cm) Shielded Neodymium 8ohm driver
HF : 1 x 1’ Shielded Neodymium throat driver + Low Distortion Constant Directivity Asymmetrical Dispersion Horn.

Height x Width x Depth

460 x 250 x 219mm(16’ x 9 7/8’ x 5 5/8’)

Weight

7.5kg(16.5 lbs)

Connectors

2 x NL1AMP speakon 4 pole

Construction

Baltic Birch Ply finished with textured polyured polyurethane black coating

Fittings : Handles

-

Front finish

Perforated steel grille

Flying Points &
Fixed Installation

Threaded inserts are fitted as standard to all cabinet surfaces for connection of mounting accessories

Stand fittings

Built in stand fitting 35mm(1’ 3/8)

SYSTEM SPECIFICATIONS PS8 with PS8 TDController

Frequency Response[a]

69Hz - 19kHz ± 3dB(43Hz - 19kHz ± 3dB with LS400 Subwoofer)

Usable Range@-6dB[a]

62Hz - 20kHz (40Hz - 20kHz with LS400 Subwoofer)

Sensitivity 1W@1m[b]

96dB SPL Nominal - 94dB SPL Wideband

Nominal Peak SPL@1m[b]

122 to 125dB Peak(for 200 to 500W RMS Amp)

HF Dispersion[c]

50˚ to 100˚ Hor. x 55˚ Vert. Rotatable Horn 4 positions

Directivity-Q & DI[c]

Q : 10 Nominal DI : 10 dB Nominal (f>1.8kHz)

Crossover Frequency

2.5kHz Passive

Nominal Impedacne

8 ohms

Recommended Amplifiers

200 to 500 Watts into 8 ohms for 1 x PS8 : 400 to 1000Watts into 4 ohms for 2 x PS8 per channel

SYSTEM OPERATION

Electronic Controller

The PS8 Loudspeaker must be used with a NEXO Controller(PS8 TD analogue NX241 digital or PS8AMP intergrated power amplifier). Use without a properly connected Controller will result in poor sound quality and may damage the components.

Dispersion Configuration

After removing the quick-release front grille the HF Horn can be rotated to one of 4 positions for dispersion configuration.

Subbass

The PS8 Loudspeaker cand be used with or without the optional LS400 Subwoofer. Active two-way operation with the LS400 is included in the PS8TD NX241 or PS8AMP. One LS400 matches 2 x PS8 additional LS400 may be used for enhanced effect.

Speaker Cables

The PSS8 is wired 2- & 2+ on Speakon connectors LS400 on 1- & 1+. Loop throught Speakons are present on both products. Single identical cables can thus be used to loop through combinations of up to 2 x PS8 & 1 x LS400 in no particular order.

SHIPPING & ORDERING

Packaging

PS8s are packaged as pairs with or without PS8 TDController in a single box.

Shipping Weight & Volume

2 x PS.8U = 16kg(35.3 lbs)0.019cu m(3.85cu ft)
2 x PS.8U + 1 x PS.8UTD = 19kg(6.61 lbs) 0.109 cu m(3.85 cu ft)

Accessories

A full selection of mounting Accessories is available