• 3-way full range
• LF - 2x 12 in woofer horn loaded
• MF - 2x 10 in cone horn loaded
• HF - 2x 2 in exit 75mm voice coil compression driver horn loaded
  

 General Application

Touring

Install Size Medium/Large Description The KF760 is part of the KF760 Line Array Series. The KF760 Series uses advanced divergence shading where all loudspeakers are powered at equal level. A full KF760/761 array can provide uniform sound coverage from directly beneath itself out to hundreds of feet without complex signal processing. Vertical coverage for the array is set by varying the rear splay of the enclosures leaving the fronts tight-packed. This configuration produces a continuous coherent wavefront from the array projecting extended range high-resolution sound over its full coverage area. Quality construction features include Baltic birch plywood enclosures heavy-duty steel grilles Neutrik NL8 connectors all steel bar-handles rear hand-holds and accessory caster pallets. Applications This high-output touring system is scalable from theatres under 1000 seats to stadiums. The KF760 is used as the medium to long throw element of a KF760 Series line array providing coverage in the range of 100 to 400+ feet. The KF761 supplements the KF760 to provide nearfield coverage for distances less than 100 feet. The recommended minimum KF760/KF761 array size is four enclosures. For full performance eight or more enclosures are recommended. To extend the low frequency response the BH760 subwoofer makes an ideal complement to the KF760 Series. <제품사양> Physical System Configuration   3-way full range Product Group   S LF Subsystem & Loading   Two 12 woofers horn-loaded MF Subsystem & Loading   Two 10 in cones horn-loaded HF Subsystem & Loading   Two 2 in exit/3 in voice coil compression drivers horn-loaded Operating Mode   Tri-amplified only Enclosure Material   Exterior grade Baltic birch plywood Finish   Wear resistant textured black paint Connector   Two Neutrik NL8 Speakon Suspension Hardware   Proprietary EAW rigging system Grille   Powder coated perforated steel foam backed Dimensions (±0.13 in / ±3 mm)     Front Height   14.50 / 368 Rear Height   12.88 / 327 Width   45.00 / 1143 Depth   31.00 / 787 Trapezoid Angle (degrees)   1.5 per side Weights (pounds / kilograms)     Net Weight   225.0 / 102.3 Shipping Weight   237.0 / 107.7 Performance Frequency Response     ±3 db   80 Hz to 16 kHz (one enclosure) 40 Hz to 16 kHz (eight enclosure array) Recommended High-Pass Frequency   40 Hz 24 dB / octave Axial Sensitivity (dB SPL 1 watt @ 1 m)     LF   96 MF   108 HF   113 LF Multi   106 (8 box array) MF Multi   125 (8 box array) LH Multi   117 (8 box array) Nominal Input Impedance (ohms)     LF   Driver 1: 8 Driver 2: 8 Parallel: 4 MF   8 HF   8 Power Handling (watts continuous)     LF   Driver 1: 800 Driver 2: 800 Parallel: 1600 MF   800 HF   300 Calculated SPL Limit (referenced to 1 m)     LF Peak   135.0 MF Peak   142.0 HF Peak   144.0 LF Long Term   129.0 MF Long Term   136.0 HF Long Term   138.0 LF Long Term multi   148.0 MF Long Term multi   163.0 HF Long Term multi   150.0 LF Peak multi   154.0 MF Peak multi   169.0 HF Peak multi   156.0 Nominal Dispersion (degrees @ - 6 dB)     Horizontal   80° Vertical   3°